 | Ten Channel Power Connector Strip Ref: 3255
Easywire ten channel connector strip for use with 12 volt dollshouse lighting circuits. Maximum of 80 bulbs , 10 bulbs max per individual channel .Screws to dollshouse , supplied with nylon spacers .
Price: £17.49 (apx €20.81)
OUT OF STOCK
People who bought this item also bought:
|
|
 |
|
|
 | Twenty Four Channel Low Power Infra Red Remote Control Unit Ref: 4042
IR remote controller with 24 outputs each output can power 2 bulbs (2x24=48 total)Control up to 24 lighting outputs from your armchair.All lights connected to the controller can be turned off/on and individually dimmed from the remote control handset.There is master dimming key, which affects all the lights in the house controlled by the unit.There is a save feature key, which stores all settings in memory, so after turning the IR remote controller off, it remembers all the bulb settings off/on and dimmed.When next turned on the house lights are restored, including the dimming settings.Programmable feature to turn on/off blocks of bulbs. You can program up to 8 blocks containing up to 8 outputs.So you could turn on a whole floor with 1 key press.The blocks are saved in memory, and restored after being turned off. The controller also has an all lights on and all lights off feature.The handset can be programmed so that it can control up to 8 different houses within the same room without interfering with each other.The remote controller can also be connected to our candle and fire flicker units. (models IRMP & IRHP only). It can then control their outputs turning them off and on. (As well as its own). It will also save all the flicker controllers lights off/on status to memory and restore these settings when next turned on.Full handset and wiring instructions included.All the wiring is connected by screw terminal blocks and the unit is fuse protected for safety.Total control from your armchair..
Price: £85.99 (apx €102.33)
|
|
|
 | Twenty Four Channel Medium Power Infra Red Remote Control System Ref: 4043
IR remote controller with 24 outputs each output can power 5 bulbs (5x24=120 total)Control up to 24 lighting outputs from your armchair.All lights connected to the controller can be turned off/on and individually dimmed from the remote control handset.There is master dimming key, which affects all the lights in the house controlled by the unit.There is a save feature key, which stores all settings in memory, so after turning the IR remote controller off, it remembers all the bulb settings off/on and dimmed.When next turned on the house lights are restored, including the dimming settings.Programmable feature to turn on/off blocks of bulbs. You can program up to 8 blocks containing up to 8 outputs.So you could turn on a whole floor with 1 key press.The blocks are saved in memory, and restored after being turned off. The controller also has an all lights on and all lights off feature.The handset can be programmed so that if can control up to 8 different houses within the same room with out interfering with each other.The remote controller can also be connected to our candle and fire flicker units. (models IRMP & IRHP only). It can then control their outputs turning them off and on. (As well as its own). It will also save all the flicker controllers lights off/on status to memory and restore these settings when next turned on.Full handset and wiring instructions included.All the wiring is connected by screw terminal blocks and the unit is fuse protected for safety.
Price: £109.99 (apx €130.89)
|
|
|
 | Twenty Four Channel High Power Infra Red Remote Control System Ref: 4044
IR remote controller with 24 outputs each output can power 6 bulbs (6x24=144 total)Control up to 24 lighting outputs from your armchair.All lights connected to the controller can be turned off/on and individually dimmed from the remote control handset.There is master dimming key, which affects all the lights in the house controlled by the unit.There is a save feature key, which stores all settings in memory, so after turning the IR remote controller off, it remembers all the bulb settings off/on and dimmed.When next turned on the house lights are restored, including the dimming settings.Programmable feature to turn on/off blocks of bulbs. You can program up to 8 blocks containing up to 8 outputs.So you could turn on a whole floor with 1 key press.The blocks are saved in memory, and restored after being turned off. The controller also has an all lights on and all lights off feature.The handset can be programmed so that if can control up to 8 different houses within the same room with out interfering with each other.The remote controller can also be connected to our candle and fire flicker units. (models IRMP & IRHP only). It can then control their outputs turning them off and on. (As well as its own). It will also save all the flicker controllers lights off/on status to memory and restore these settings when next turned on.Full handset and wiring instructions included.
Price: £135.99 (apx €161.83)
|
|
|
|
|
|
|
|
|
|
|
